1.   Read the "Notes and Tests" section of the lab setup page first to see what details to take into account when setting up.

2.      Make sure all trash is off tables.

3.   Take down everything in both rooms unless there's anything that can be used in the next lab to be set up.

4.      Sweepy Sweepy.

5.   Set up new equipment for the lab.

6.   Test all equipment as it is set up.

7.      Make sure each station has at least two chairs.

8.      Clean up printer area and any other miscellaneous stuff lying around.  Make sure there is paper, extra equipment, and paper towels when needed in the TA closet. Check staple and tape supply.

9.     Check for missing equipment.

10.  Replace all equipment that needs to be repaired.  Never reshelf equipment that needs to be repaired; put it in the broken parts bin.

11. Return all storage bins to their storage location.

12.  Make sure any parts that need to be replaced (e.g. Light bulb) are replaced.  If the supply of spare equipment is low place the item on the order list.

13.  Check the brass weight sets are complete. (1-10g, 2-20g, 1-50g, 1-100g, 2-200g, 1-500g)

14.  Check to make sure that all items in the storage closet are returned to their correct storage location.  There should be no items left on any counter.

 Virginia Tech Physics           Lab Setup list