|
Lecture Demonstrations | |
Light |
||
L17: Refraction of Light |
||
|
||
![]() |
|
Turn on the power supply and adjust the light source to produce a narrow beam. Move the source to various angles of incidence, and verify Snell's law. When the light beam is incident from below the water surface, both the refracted and reflected beams are visible when the angle of incidence is less than the critical angle. As the angle increases toward the critical angle, it is clear that the amount of light in the refracted beam decreases to zero as the reflected beam increases to 100% of the incident. Measure the critical angle and compare with the value predicted from Snell's law. Be sure to use the current limiting DC power supply. Turn the current limiter knob to about the 12 O'clock position (not above 2A), and turn up the voltage to about 6V. This will make sure you do not blow out the bulb. |
![]() |
Storage Location: CHEMP 130A |
|
Optical Water Bath, Model RT-100N, containing water to the center of the scale | A2.2 |
BK Precision DC Regulated Power Supply | C1.4 |
|
Manual: None | Setup Notes: L17 | PIRA #: |
Manufacturer(s): | Other school's Demonstration web pages |
![]() |
![]() |