Transition notes:

1. The following can stay from the previous lab:
   • All three of the black and red banana cords
   • The digital multimeters
   • The Bento Box
2. Sweepy!

Equipment List:

1. PB-103M Protoboard with:
   • Red and Black Jumper wires from the Banana Terminals to the left rail.
2. D Cell Battery Holder Plugged into the red and black Terminal in the ProtoBoard.
• 2 x D Cell Battery
• Banana plug adapters
3. 3 x Red banana plug cord
4. 3 x Black banana plug cord
5. 2 x Black Minigrabber
6. 2 x Red Minigrabber
7. 2 x Autorange Multimeter
8. Current Limited Power Supply
9. "Bento Box" of the following supplies:
• Collection of Long Pin Jumper cables (Where the Alligators were)
• 2 x Long Red Pin Jumper.
• 2 x Long Black Pin Jumper.
• 2 x Long Green Pin Jumper.
• 2 x Long White Pin Jumper.
• 2 x Long Yellow Pin Jumper.
• 2 x Long Blue Pin Jumper.
• Collection of Short Pin Jumper cables (Where the Alligators were)
• 2 x Short Red Pin Jumper.
• 2 x Short Black Pin Jumper.
• 2 x Short Green Pin Jumper.
• 2 x Short White Pin Jumper.
• 2 x Short Yellow Pin Jumper.
• 2 x Short Blue Pin Jumper.
• Collection of Short Pin Jumper cable extensions (Where the Bare Wires were)
• 2 Short Red Pin Jumper Extension.
• 2 Short Black Pin Jumper Extension.
• 2 Short Green Pin Jumper Extension.
• 2 Short White Pin Jumper Extension.
• 2 Short Yellow Pin Jumper Extension.
• 2 Short Blue Pin Jumper Extension.
• Collection of resistors (where the Variable Resistor was)
• 5 x 50 ohm resistors
• 2 x 100 ohm resistors
• 2 x 4.7 ohm resistors
• 2 x 100 kohm resistors
• Pencil Sharpener
• Pack of Colored Pencils
• 5 x 10cm Jumper Wire
• 5 x 25cm Jumper Wire
• 5 x Light Element