Equipment List:

1. Main Water Tray
2. 3 x WaterTrayLeg
3. Ripple Generator
• Plugged into a Vibrator AC Adapter
• Mounted on a Rod - 90cm
• With an A-Base - small as the base
• A Ripple Bar attached to the generator
• And 2 x Ripple Pegs clipped in the ripple bar
4. Ripple Tank Light
• Centered over the tank using a 45 cm rod
• Attached to the 90 cm rod using a Right angle clamp
5. Transparent Ruler
6. White Board - Small
7. Whiteboard Eraser
8. Dry Erase Markers With:
• Red Marker (Colors Not Yet in JSON File)
• Blue Marker (Colors Not Yet in JSON File)
• Green Marker (Colors Not Yet in JSON File)
• Black Marker (Colors Not Yet in JSON File)
9. 1000mL Measuring cup

General Class use :

1. Laser - Large
2. Double Slit Screen
3. White Board - Small between cabinets on TA counter for measuring diffraction pattern (2 per room)
4. 2 x 1 Meter Stick per room

Notes and tests:

1. Clean the Tanks with Glass cleaner
2. Test the ripple generators and strobe light.
3. The pegs should not be attached initially
4. The light should be set to "Steady" instead of strobe.
5. Do not use transparent rulers if possible.
6. Fill all tanks with water so that it just touches the bar when it is angled down. The generator itself should not be touching the tank.
7. Vaccum out all tanks and sponges for clean up.