Transition notes:

1. The following can be left out from the previous lab (2215 Lab 4: Kinematics Part 2)
   • Cart Mass - 500g (Vernier)
   • Cart Track 2.2 meters (Pasco)
   • Dynamics Cart (Vernier)
   • Elevation Clamp
   • Lab Pro Interface
   • Lab Pro Interface Power Supply
   • Screw, Thumb - Vernier Cart Mounting Short
   • All 4 Screw, Thumb - Track End Stops (this is not enough for this lab, you will need to add one more for a total of 5)
   • Both Track End Stops
   • Both Track Feet Brackets
   • All four Track Feet
   • USB-A to USB-B Cord
   • Wing Nut
2. Don't forget to sweep!!!!! Please!!!!

Equipment List:

1. Computer - 2000 level Desktop
2. LabPro Interface
3. LabPro Interface Power Supply
4. Force Sensor (Vernier)
5. Force probe hook
6. Screw, Thumb - Force Probe Mounting
7. 2.2 Meter Cart Track
8. 2 x Track Feet Brackets
   • Each bracket needs to have 2 x Track Feet in each bracket (so FOUR feet total)
9. 2 x Track End Stop
10. 5 x Screw, Track End Stop
11. Elevation Clamp
12. Rod - 90cm
13. Universal Clamp - Medium
14. Vernier Dynamics Cart
15. 500g Cart Mass
16. Screw, Thumb-Verneir Cart Mounting Short
17. Wing Nut
18. 0.75m string
19. 1 meter stick
20. Angle Meter
21. USB-A to USB-B Cord

General class use:

1. Electronic Balance - 2200g, 0.1g readability